Product Description
Marine inflatable bags
1.Product Introduction
Marine inflatable bags also known as rubber airbag, ship launching airbag, ship salvage airbag, inflatable airbag, ship lifting bag, air balloon, made by rubber &Â multi-layer of rubber-dipped tyre fabric.
Marine inflatable bags meet the CB/T3837 and CB/T 3795 requirements
Marine inflatable bags are widely used in launching and landing ship/ boat/vessel, lifting and moving heavy goods, salvaging stranded boats.Marine airbags are very popular with shipyard, ship owner, and marine supplies company now.
Marine inflatable bags characteristics:
1.High strength:The polyamide cord thread for airbag is produced with high tension reinforced fiber.A cord thread has the strength more than 320N, and the cord fabric has consistent and reliable quality.Our company developed and manufactured high strength airbags with the higher strength steel wires and aramid fiber as skeleton materials on customers' request.
2.Wear resistance and anti-aging:An airbag often works in extreme conditions, for example, it is soaked in sea water, insolated in the direct sunlight and rolled in sand.Our marine is produced with natural rubber in a reasonable formula.The practice proves that airbag has high wear resistance and anti-aging ability, and the service life as long as 8-10 years.
3.Good air tightness:Our Company use high quality rubber, as material and the advanced manufacture process to assure that our products have good air tightness, especially air tightness of the assisted floated airbag.Our airbag can keep its pressure 24 hours with work pressure, the pressure will reduce less than 3%.
4.Safety and reliability:Giyo marine airbag with the optimized structure design has the safety coefficient of 4-6 times, namely that its bursting pressure is 4-6 times its work pressure.Our airbag has a multi-channel airbag mouth to enhance the strength and air tightness between the airbag body and mouth.
| Type and normal size of marine airbag | ||||
| Type | Number of fortifying fiber layers | Demeter range | Normal lengths | Main usage |
| HT-3 | 3 | D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m | 5-18m | Suitable for the small ships up to slipway and launching as well as transportation of objects |
| HT-4 | 4 | D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m | 5-18m | Suitable for the larger ships up to slipway and launching as well as transportation of objects |
| HT-5 | 5 | D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m | 5-18m | Suitable for the lager and medium size ships up to slipway and launching as well as transportation of objects |
| HT-6 | 6 | D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m | 5-18m | Suitable for the size ships up to slipway and launching as well as transportation of objects (Â according to the vessel's actual size) |
| HT-7 | 7 | D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m | 5-18m | |
| HT-8 | 8 | D=0.8m,1.0m,1.2m,1.5m,1.8m,2.0m | 5-18m | |
| Note:Other sizes are also available | ||||
| Parameters and performance of  the marine airbag | ||||||
| Type | Safety working pressure | |||||
| D=0.8m | D=1.0m | D=1.2m | D=1.5m | D=1.8m | D=2.0m | |
| HT-3 | 0.13Mpa | 0.10Mpa | 0.09Mpa | 0.07Mpa | 0.06Mpa | 0.05Mpa |
| HT-4 | 0.17Mpa | 0.13Mpa | 0.11Mpa | 0.09Mpa | 0.08Mpa | 0.07Mpa |
| HT-5 | 0.21Mpa | 0.17Mpa | 0.14Mpa | 0.11Mpa | 0.09Mpa | 0.08Mpa |
| HT-6 | 0.25Mpa | 0.20Mpa | 0.17Mpa | 0.13Mpa | 0.11Mpa | 0.10Mpa |
| HT-7 | 0.30Mpa | 0.25Mpa | 0.20Mpa | 0.15Mpa | 0.13Mpa | 0.12Mpa |
| HT-8 | 0.33Mpa | 0.28Mpa | 0.23Mpa | 0.18Mpa | 0.15Mpa | 0.14Mpa |
Breif Introduction of Biomass Pellet Machine:
♦ YGKJ series Vertical Ring Die Pellet Machine absorbed the essence of pellet mill in oversea market,after our engineers improved,it had reached the international advanced level.
♦ The heart parts [double layer die" has unique structural assembly and [rollers" are made of high quality wear resistant alloy steel.These two parts have the following characters: particular design, reasonable structure, low energy, high efficiency, long service life and so on.
♦ YGKJ series verticaol Ring Die Pellet Machine is mainly applicable for difficult molding materials with low adhesion rate, for example rice husk, sunflower husk, peanut shell and fruit shell; branch, stem, rind and other wood waste; a variety of crop stalks; rubber, cement, ash and other chemical materials. It can be used in feed mill, wood processing plants, fuel plants, fertilizer plants, chemical plants etc.
♦ Less investment,Fast return,No risk.
YGKJ series efficient vertical ring die pellet machine is an ideal dense.
Features of Biomass Pellet Machine:
1.Motor of biomass pellet machine use Siemens Brand. This kind of motor is frequency and has thick copper coil, it won`t be burned due to instantaneous current.
2.Reducer adopts professional pellet mill reducer Guomao brand, which can ensure the quality and after-sale service.
3.Electric components of sawdust pellet machine adopts famous Delixi brand, which can ensure the quality and after-sale service.
4.Electric control cabinet of pellet mill adopts Invt brand frequency converter, famous brand with higher quality
5.Bearing of Wood Pellet Machine uses Haerbin brand from the Haerbin main workshop
6.Independent research and development steel ring replace of traditional Viton pad, which won`t leak materials. It barely needs to replace which reduce the maintenance cost.
7.Stainless Die of pellet mill is designed according to different raw material.
8.Cooling system combines cyclone dust collector and bag dust removal, which avoids jam caused by the mixing of water vapor and dust.
Technical Parameter of Biomass Wood Pellet Machine:
|
Model |
Power(kw) |
Diameter(mm) |
Capacity(t/h) |
Measurement(mm) |
Weight(T) |
|
YGKJ560 |
90+1.5+0.37+1.5 |
4-12 |
1-1.5 |
2600*1300*2300 |
5.8 |
|
YGKJ680 |
160+1.5+0.37+1.5 |
4-12 |
1.5-2.5 |
3300*1500*2300 |
8.5 |
|
YGKJ850 |
220+3+0.37+2.2 |
4-12 |
2.5-3.5 |
3800*1830*3080 |
15 |
Biomass Pellet Machine
Biomass Pellet Machine,Biomass Pellet Mill Machine,Biomass Pellet Making Machine,Wood Biomass Pellet Machine
Shandong Rotex Machinery Co.,Ltd , http://www.woodpelletmachinery.com