Raw material:
The pellet mill is suitable to make no oily and which are dried by driers, such as rice hus,sawdust, cotton stalks, cottonseed skins, rank grass, and other crops straw and plant waste. The equipment is also widely used in power plant, wood processing plant and biomass fuels plant.
Â
Pellet Size: Wood pellet machine can produce diameter 4-12mm wood pellets , usually 6mm for Europea,8 mm for Kroea and 8-10mm for China. The  pellet diameter and length can be adjusted according to your demand.
Â
Pellet moisture: 8%-10%,  density >1.1, completely satisfy DIN standard(if only your raw material is good),and our vertical ring die wood pellet machine is a best machine to manufacture wood pellet fuel .
Parameter:
Â
| Model | Power(KW) | Capacity(t/h) |
| SZLH380 | 30 | 0.3-0.5 |
| SZLH470 | 55 | 0.8-1.0 |
| SZLH560 | 90 | 1.2-1.5 |
| SZLH760 | 160 | 1.5-2.5 |
| SZLH850 | 220 | 2.5-3.5 |
Advantages:
1.Feeding Vertically
Raw material is feeding vertically and is directly in place, with stationary die and rotary pinch roller, the material is centrifugal and equispaced around the die.
2.Ring Die.
The die is double ring type, with vertical structure. Pelletizing room is also used for cooling, more options, and more gains.
3.Independent ejection device.
The independent ejection device ensures the forming rate of the pellet. The good design lowers the consumption and enhances the efficiency. It works 24 hours and lubricates automatically.
4.Environmental and energy-saving.
The main load-carrying component uses high alloy wear-resistant materials. The wearing parts' lifetime doubles compared with other similar products.
Detailed parts photo:
Application:
Company development:
Technical support:
Customer visit:
Delivery photo:
 Pellet size 6/8/10mm wood pellet machine for sale
Raw material:
The pellet mill is suitable to make no oily and which are dried by driers, such as rice hus,sawdust, cotton stalks, cottonseed skins, rank grass, and other crops straw and plant waste. The equipment is also widely used in power plant, wood processing plant and biomass fuels plant.
Â
Pellet Size: Wood pellet machine can produce diameter 4-12mm wood pellets , usually 6mm for Europea,8 mm for Kroea and 8-10mm for China. The  pellet diameter and length can be adjusted according to your demand.
Â
Pellet moisture: 8%-10%,  density >1.1, completely satisfy DIN standard(if only your raw material is good),and our vertical ring die wood pellet machine is a best machine to manufacture wood pellet fuel .
Parameter:
Â
| Model | Power(KW) | Capacity(t/h) |
| SZLH380 | 30 | 0.3-0.5 |
| SZLH470 | 55 | 0.8-1.0 |
| SZLH560 | 90 | 1.2-1.5 |
| SZLH760 | 160 | 1.5-2.5 |
| SZLH850 | 220 | 2.5-3.5 |
Advantages:
1.Feeding Vertically
Raw material is feeding vertically and is directly in place, with stationary die and rotary pinch roller, the material is centrifugal and equispaced around the die.
2.Ring Die.
The die is double ring type, with vertical structure. Pelletizing room is also used for cooling, more options, and more gains.
3.Independent ejection device.
The independent ejection device ensures the forming rate of the pellet. The good design lowers the consumption and enhances the efficiency. It works 24 hours and lubricates automatically.
4.Environmental and energy-saving.
The main load-carrying component uses high alloy wear-resistant materials. The wearing parts' lifetime doubles compared with other similar products.
Detailed parts photo:
Application:
Company development:
Technical support:
Customer visit:
Delivery photo:
Â
The Tapered Roller Bearing belongs to the separation type bearing, and the inner and outer rings of the bearing have a conical raceway. This type of bearing is divided into single, double and four row tapered Roller Bearing according to the number of the roller. The single row Tapered Roller bearing can bear the radial load and the single direction axial load. When a bearing is subjected to a radial load, an axial force will be produced, so another bearing that can withstand the axial force of the opposite direction is needed to balance it.
There is a single row tapered roller bearing outer ring, the inner ring and a conical roller by maintaining a basket frame into the inner module. The outer ring can be separated from the inner ring assembly. According to the standard of the ISO tapered roller bearing dimension, any standard type tapered roller bearing outer ring or inner ring assembly should be able to achieve international interchangeability with the same type of outer ring or inner ring assembly. For example, the outer ring of the same type should conform to the ISO492 (GB307) rule besides the external dimension and tolerance. The conical angle of the inner ring assembly and the diameter of the component cone must also comply with the relevant provisions of the interchangeability.
Usually, the conical angle of the outer raceway of the single row tapered roller bearing is between 10 degrees ~19 degrees, and it can simultaneously bear the joint action of axial load and radial load. The larger the cone angle, the greater the ability to bear the axial load. The bearing of the big cone angle, the postposition code plus the B, the cone angle between 25 degrees ~29 degrees, can bear a large axial load. In addition, the single row tapered roller bearing can adjust the size of the clearance during the installation process.
The outer ring (or inner ring) of a double row tapered roller bearing is a whole. The two inner ring (or outer ring) has similar small end faces, and the middle has a spacer. The clearance is adjusted by the thickness of the spacer, and the pre interference of double row tapered roller bearings can also be adjusted by the thickness of the spacer.
The performance of the four row tapered roller bearing is basically the same as that of the double row tapered roller bearing, but the radial load of the double row tapered roller bearing is greater than that of the double row tapered roller bearing, and the limit speed is slightly lower, which is mainly used for heavy machinery.
Multi seal double, four row tapered roller bearings, ZWZ provides long life, multi seal double, four row tapered roller bearings. The new design of the bearing is personalized and the traditional design method of the fully sealed bearing is changed. A new seal structure combined with seal and dust-proof is adopted to improve the sealing effect and improve the sealing performance. Compared with open structure bearings, the life of multi seal double and four row tapered roller bearings increased by 20% to 40%, and the consumption of lubricants was reduced by 80%.
Tapered roller bearings are widely used in automobile, rolling mill, mine, metallurgy, plastic machinery and other industries.
Taper Bearing Tapered Roller Bearing,Durable Taper Bearing Tapered Roller Bearing,Cheap Taper Bearing Tapered Roller Bearing,Single Row Taper Roller Bearing
LUOYANG AUTO BEARING CO.,LTD , http://www.lyautobearing.com