What kind of car is so "anti-made" Xugong QAY1200 all-terrain crane

Wind energy is a clean and stable new energy source. As environmental pollution and greenhouse gas emissions become more and more serious, wind power is recognized as a global solution to effectively mitigate climate change, improve energy security, and promote low-carbon economic growth. High attention from institutions and companies. In addition, wind power has become one of the fastest growing energy sources in the world in recent years due to its relatively mature wind power technology and its high cost-effectiveness and resource efficiency.

Wind power has become one of the fastest growing energy sources in the world in recent years.

Thanks to the strong support of the state, in recent years, China's wind power has developed rapidly. At present, China has become the world's largest and fastest growing market for wind power. The Hebei region has this extremely abundant wind resource, which effectively supports the development of wind power construction in many regions.

Luneng Ningxia Yanchi Yujialiang 100MW wind farm, a QAY1200 is exerting its omnipotent ability. It is reported that there are currently 5 wind turbines to be installed in the wind farm, and the project party requires installation in half a month, that is, regardless of the weather factor, the average calculation time is only 3 days, and the distance between each fan is At least 5 kilometers or more, in the case of effectively ensuring the efficiency of lifting, the transition efficiency can be maximized, which will play a vital role in the final completion of the mission.

After several rounds of project discussions by the project side, only the QAY1200, which has been through the battlefield, can shoulder this heavy responsibility, and the familiarity of the products has given them great confidence.

The close look at QAY1200 will always be shocked by his huge...

In addition to time constraints, this hoisting condition is much larger than the conventional 2.0MW wind power. The overall lifting weight of the impeller is as high as 67t, and the impeller diameter reaches hundreds of meters, which is in the confrontation between the tight time and the excessive working conditions. Next, QAY1200 seems to be in a disadvantage, but "the last laugh is the real winner."

In the afternoon, QAY1200 completed the installation of counterweight, super-lift and wind power arm.

This lifting is a serious challenge for the XCMG QAY1200 all-terrain crane, whether it is lifting height or cabin weight.

However, according to the latest weather at the time, there will be strong winds on the night of the installation, and the weather on the third day is unknown. This means that the wind turbine must be installed before the wind blows, otherwise it will be delayed for more than two days. At this time, the play of QAY1200 determines the success or failure of the entire project.

The most difficult impeller is also placed on the hub, the whole process is completed in one go

It is reported that the wind power installation project uses the difficult tower working conditions, which is quite different from the over-loading conditions of the main boom used in the past. The actual parameters of the domestic 2.0MW wind turbines have reached the international standard of 2.5MW. Whether it is the lifting height or the cabin weight, it is a severe challenge for the XCMG QAY1200 all-terrain crane.

From the first section to the third quarter of the tower installation QAY1200 with a skillful performance to the project side to eat a reassurance, followed by a generator weighing up to 58 tons, to know that the height of the hub of the installation can be as high as 90 meters. Finally, the most difficult impeller is placed on the hub, and the whole process is completed in one go.

Xugong QAY1200 all-terrain crane has won the praise of the construction unit for its excellent performance and stable working condition applicability.

The first fan was successfully installed for everyone to eat a reassurance, more than ten hours of continuous operation. In the end, XCMG QAY1200 all-terrain crane won the praise of the construction unit for its excellent performance and stable working condition applicability. .

According to the operator, a large-scale wind power installation project in Jining, Mongolia, the working area of ​​each installation point is no more than 30 square meters, the steep slope of the slope is 29%, and the construction period plans to install 50 2.5MW wind power for 3 months, with an average of less than 2 One day will be completed. The wind power company negotiated with the localities to build roads and expand the venues. The cost was too high. This construction site and efficiency requirements are unprecedented in the world. Imported 1,200 tons of cranes, the top of the mountain site is not enough, can not climb up, still need three trailers to transport the parts of the crane, whether it can be transported up the mountain is a problem, even if feasible, 4 days without stopping the completion of a wind power is the limit. However, the company that won the bid was completed on schedule with this QAY1200.

It is also this QAY1200 that it has installed wind turbines in Inner Mongolia for 20 consecutive days at a speed of minus 35 degrees. It is also the record of completing 31 wind farms and installing nearly 400 wind turbines in various complex mountains, making it the highest level in the world. Lifting equipment is also prohibitive. The QAY1200 all-terrain crane took only 4 hours to install from the No. 1 installation point to the No. 2 installation point. It is a subversion of the traditional concept of the wind turbine industry experience.

No one expected that QAY1200 would be so "anti-made". We don't know how big this big man is, but as long as there is an opportunity, it is constantly creating all kinds of incredible. (This article comes from Xugong lifting)