RS9000/9000XL eddy current sensor
Model: YTHN800
YTHN800 series integrated eddy current sensor is based on HN800 eddy current displacement sensor. It adopts micro-chip package and circuit improvement technology to integrate probe and pre-position. It adopts non-contact measurement and long-term work reliability. It has high sensitivity, strong anti-interference ability, response speed block, no oil, steam and other media. Therefore, it is often used in the axial displacement, swing, shaft vibration of large rotating machinery in electric power, steel, petrochemical and other industries. Long-term real-time monitoring of parameters such as speed.
Integrated eddy current sensor technical parameters
CWY/DWQZ-DO eddy current sensor
The integrated eddy current sensor is designed and manufactured according to industry specifications. The probe head is protected by high-low temperature and various chemical corrosion polyphenylene sulfide (PPS) injection molding, the coil is tightly sealed; the circuit is made of acid-proof stainless steel M16×1 or M20. ×1.5 threaded tube and epoxy resin package, moisture-proof and dust-proof; signal cable is shielded cable, can be installed with stainless steel metal hose armor protection; with power polarity, output short circuit, multiple protection functions, any wiring error will not be damaged Can work continuously for a long time in harsh environments.
Eddy current displacement sensor WT-D0-A2-B2-C2-D2
6 voltage output form sensor power supply: +24Vdc output: 1 ~ 5V,
-24Vdc -2～-18V
7 Current output form sensor power supply: +24Vdc 4~20mA
Frequency response: 0 ~ 10kHz, output form: three-wire voltage or current output or two-wire current output. Working temperature: -50 ~ +120 ° C, temperature drift 0.05% / ° C. Strong anti-interference ability, high reliability and long life. Non-contact measurement, never wear.
RS9000/9000XL eddy current sensor
2 two-wire vibration transmitter
2 two-wire vibration intensity transmitter
2 two-wire shaft vibration transmitter
BSQ001 power converter BSQ011a/BSQ011b/BSQ011c/BSQ011d/cu-02 vibration transmitter BSQ015a/BSQ015b/BSQ015c/BSQ015d vibration intensity transmitter
BSQ021/BSQ021a/BSQ021b/BSQ021c/BSQ021d/BSQ021e Shaft Vibration Transmitter
BSQ031/BSQ031a/BSQ031b/BSQ031c/BSQ031d/BSQ031e Axial Displacement Transmitter
BSQ051a/BSQ051b/BSQ051c/BSQ051d speed transmitter
BSQ073a/BSQ073b/BSQ073c/BSQ073d Stroke Transmitter
WZ-5A/WZ-5B speed signal transmitter
ZHS-9/ZHV-9/SLMCD-21T/WINYV/ZD8133/OD9200T/MLS/V-9/FZB/YMLV/JX73/JX73ST/BJ230/YZHS/YZHV/YZH-B/WB-8111B integrated vibration sensor Feeder
TR2001/TR2011/TR2031/TR2061/TR2081/TRZF/TR95/SZBS-1 Transmitter
DTM/TM101/TM201/TM202/TM301/TM302/TM501/TM502/Transmitter
990 vibration transmitter / 991 axial displacement transmitter
SLM/SLM-1000/SLM-2000/SLM-3000/SLM-4000/SLM-5000/SLM-6000/SLM-7000/SLM-8000/WINV/EN2000A4/EN2000A5/EN2000A6/Transmitter
ZXP-T100/ZXP-T110/ZXP-T120/WZ-5A/WZ-5B/ZD24-ZF-1/ZD24-ZF-2 Transmitter
Main Model no. : SC100, SC100/100, SC150, SC150/150, SC200 and SC200/200
3m length cage, maximum 250m lifting height, 2tons/4tons capacity, can lift material and people, with operation room
Both twins cage and single cage are available.
Introduction for SC200/200 Construction Lift Elevator/ Buidling Hoist/ Construction Passenger Hoistadopted computer aided design. Comparing with traditional building hoists, it is attractive, light, easy to handle, secure, applicable, and popular. Depending on special needs of regular or irregular sections, the lifting capacity can reach up to 1~2 tons, and the running speed can reach 28~38m/min. Moreover, VVVF speed regulation and PLC enable 0~68 limitless speed, automatic layer selecting and leveling as required. SC200/200 Building Hoist is excellent in technical performance, more secure in operating mechanism, and more compact in structure.
This style construction elevator:
1,Adopts computer aided design
2,Light, easty to operate
3,Lifting capacity can reach up to 4tons
4,Running speed can reach 28 to 38m/min
5,use VVVF speed regulation enable 0 to 68m/min range-optional
6, PLC, provide automatic layer selecting and leveling as required-optional
7,Anti-corrosion treatment for the internal and external mast
Construction Hoist,Building Hoist,Mobile Crane,Construction Lift
Miliscorp Industry Ltd , https://www.mctowercrane.com