
The rapid growth of the testing market not only promoted the rapid development of domestic testing institutions, but also attracted foreign testing agencies to invest in China to establish laboratories. The broad market prospects in the field of rapid food safety detection have attracted a large amount of capital to enter this industry, which has a certain positive significance for the rapid development of the industry and technological progress. However, various equipment manufacturers should dig deeper into market segments based on their own advantages to better provide products in advantageous areas to meet the multi-faceted market demand.
The rapid detection of food industry development is mixed
Along with the rapid growth in the demand for rapid food safety testing, the rapid food testing equipment industry has also seen mixed growth. Because there are many manufacturers of fast-check products, the accuracy of fast-checking of their products is also different. Zhang Hongyan, deputy chief of the department of urban and rural warehousing supermarkets in Haidian District of Beijing, believes that the accuracy rate of most regular quick-check products on the market is about 70%. Because there are many manufacturers of fast-check products, the accuracy of fast-checking products varies from product to product. In the actual operation of the quick inspection product, there will be false positives, that is, the quick inspection has detected problems, but after further tests conducted by a state-qualified laboratory, there is no problem; there are also false negative cases, that is, there is no problem in quick inspection. However, after further tests conducted by nationally qualified laboratories have identified problems, these situations can sometimes cause food problems to escape the net and sometimes cause miscarriage of justice.
At present, relevant departments of the State are brewing mechanisms for the entry and product certification of manufacturers of fast-check products. Actual testing is performed on accuracy, detection limit, precision, repeatability, reproducibility, anti-interference, and analysis time of the entire process. This is to evaluate the effectiveness of rapid inspection equipment, improve product production and sales thresholds, ensure healthy development of the industry, and truly play the role of fast inspection as a primary guarantee of food safety technology.
Fast detection instruments tend to be portable and informatized
More than a decade ago, the funds for rapid testing of projects were very few. Now that the funding for rapid inspection projects has been increased, the government is paying great attention to the rapid detection technology research. From Beijing Zhongwei in the 1990s to Wanger after 2000, to now Weideweikang, Qinbang Biology, and Sino-German Biology, China’s professional team for rapid detection and R&D has become increasingly large, and the rapid detection technology has developed rapidly. Fast, the technology level of the domestically-made rapid testing instruments and kits has been greatly improved, and the types are increasing. I think that the current domestic rapid inspection equipment is not inferior to the imported rapid inspection equipment and can fully meet domestic demand.
At present, we have put some new technologies into practical use, but there are still some new technologies that are still in our laboratory research stage. In the future, we will gradually realize the commercialization of the instruments so that we can more widely promote applications and meet more market demands.
Gao Zhixian believes that more portable, serialized, informatized, and integrated are the development direction of rapid detection instruments. It is more portable and can even be packed into pockets and brought to the scene to carry out risk monitoring. In series, such as protection against emergencies and large-scale activities, daily supervision and monitoring, we can give a series of coping solutions; information is very important. After the on-site inspection, the data will be directly transmitted to the laboratory for confirmation. This will have a more rapid and more accurate significance for the next step. The future rapid detection instruments will become more and more integrated, such as with molecular imprinting technology, nano-biotechnology, With the combination of new materials and technologies such as biosensing technology, there will be more room for rapid detection.
Rapid inspection of food safety has entered the law
Li Yujia, deputy director of the China Food and Drug Administration, also said that "rapid testing is legally statutory," and the relevant laws and regulations, including the Food Safety Law, stipulate the food safety supervision departments, especially the grass-roots regulatory agencies, and food safety. In the daily supervision process, rapid detection methods should be used to promptly identify problems. "This is clear and the law is stipulated." At the same time, he also mentioned that according to the results of rapid test results, penalties for relevant units and individuals need to be further defined by laws.
Yu Jun, director of the three divisions of the State Food and Drug Administration, said at the meeting: "At present, domestic rapid detection products are widely used in government departments." "But there is no department or related policy to regulate the rapid detection of product quality."
In this case, Yin Jianjun, the secretary general of the National Standardization Technical Committee for Quality Supervision and Inspection of Key Products, said that “the “professional working group for the food safety and rapid inspection method of the National Standardization Technical Committee for Testing Methods for Quality Control Key Products†will be established.†“The main work content is†"The establishment of rapid verification methods for food safety compared with verification standards", according to which "screening rapid detection methods at home and abroad," "a good way to" form a "quick detection standards."
TPU (thermoplastic polyurethane) Paint Protect Film is a revolutionary product that has gained popularity in the automotive industry. It is a clear, self-healing film that is applied to the exterior of a vehicle to protect the paintwork from scratches, chips, and other forms of damage. TPU Paint Protect Film offers a high level of durability and resistance to UV rays, chemicals, and harsh weather conditions. This film is becoming increasingly popular among car enthusiasts and professionals alike, as it not only enhances the appearance of the vehicle but also preserves its resale value.
Installing TPU paint protection film (PPF) can be done with a few simple steps. Here's a guide to help you through the process:
1. Gather the necessary materials: You will need TPU paint protection film, a squeegee, a spray bottle filled with a mixture of water and a few drops of soap, a microfiber cloth, and a heat gun (optional).
2. Prepare the surface: Clean the surface of the car where you will be applying the film. Use a mild cleaning solution and a microfiber cloth to remove any dirt, dust, or debris. Make sure the surface is completely dry before proceeding.
3. Cut the film: Measure and cut the TPU paint protection film to the desired size and shape. It is recommended to leave a few extra inches around the edges for easier installation.
4. Wet the surface: Spray the surface of the car with the water and soap mixture. This will create a slippery surface that allows you to position and adjust the film.
5. Apply the film: Peel off the backing of the TPU film and carefully position it on the wet surface of the car. Start from one edge and slowly work your way across, smoothing out any air bubbles or wrinkles with a squeegee. Use the squeegee to firmly press the film onto the surface, removing any excess water and ensuring a secure bond.
6. Trim the edges: Once the film is applied, use a sharp blade or a precision knife to trim the excess film from the edges. Take your time and make precise cuts to achieve a clean and professional finish.
7. Heat and finalize: If desired, you can use a heat gun to gently warm the film, which helps it conform to the curves and contours of the car. Be careful not to overheat the film, as it may cause damage. After heating, use the squeegee again to ensure the film is securely adhered and free of any air bubbles or imperfections.
8. Let it cure: Allow the TPU paint protection film to cure for at least 24 hours before exposing it to water, extreme temperatures, or any other potential sources of damage.
Self-Repairing TPU Gloss,TPU Matte,TPU Gloss Black,TPU Matte Black,TPU chameleon white,TPU roof
Guangzhou Fuyulai Technology Co.,Ltd , https://www.fuyulaifilm.com