Chicago Still & Box Alarm fire, 1-28-17 (part 3)

Here's a message from Eric Haak:

The fire occurred around 1:30 PM on Saturday, January 28, 2017. It was located in a historic home from the 1800s at 45th and Ellis. I arrived just after the 5th Battalion had secured the area. It looked like the fire was mainly in the attic. The neighboring property was reported as vacant and in poor condition, but the fire remained contained to the original occupied section.

Chicago FD Engine 45

Eric Haak photo

Chicago FD Tower Ladder 37

Eric Haak photo

heavy smoke from roof to townhouse on fire

Eric Haak photo

heavy smoke from roof to townhouse on fire

Eric Haak photo

firefighters raise big ground ladder

Eric Haak photo

Chicago FD Tower Ladder 37

Eric Haak photo

Chicago FD Engine 60

Eric Haak photo

fire chief on scene

Eric Haak photo

firefighters with dirty faces

Eric Haak photo

Chicago FD candidate on the job

Eric Haak photo

The photos show firefighters working hard under tough conditions. You can see Engine 45 and Tower Ladder 37 responding to the call, along with other units. There’s also a shot of the fire chief on scene, and some images of the heavy smoke coming from the roof. One photo shows a large ground ladder being raised, and another captures firefighters with soot-covered faces, showing the intensity of the work. A few shots even include a Chicago FD candidate on the job, giving a glimpse into the real-life efforts of those who serve.

Spiral Plate Heat Exchanger

Heat exchanger with spiral plate design is formed by steel plate bundle as a whole, forming two identical spiral channels. Two heat transfer medium are meant to meet a counter-current flow, to greatly enhance the heat exchange effect.


It will work well for steam-steam, steam-liquid, liquid-liquid heat transfer, which is applied in chemical, petroleum, solvent, medicine, food, light industry, textile, metallurgy, coking and other industries. The structure is divided into non-detachable spiral Plate Heat Exchanger and detachable spiral plate heat exchanger, according to different customers` requirements.


Most of the time, SS304 is the main material. It protects the exchanger from corrosion over time, while ensuring great transfer efficiency. Pressure range 1.0MPa~2.5MPa also gives the plate heat exchanger a certain bearable requirements.


Distance column, special steel bar inside of the spiral plate heat exchanger, also contributes to its stable connection between plates, and also offers a turbulence flow among the channel for efficiency consideration.

Spiral Plate Heat Exchanger,Spiral Cooler,Spiral Flow Heat Exchanger,Spiral Cooler Heat Exchanger

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jmheatexchanger.com