The correct use of the pump

Although there are many reasons for the motor being burned, the proper use of the pump is one of the important reasons. When using a water pump, after the power is turned on, carefully observe the operation of the water pump. The water should be continuous and uniform, and the pump can be used without vibration and noise. If the machine suddenly shuts down during operation, immediately disconnect the power supply and check its cause. The interval between two start-up times of the pump shall be limited to the total return of the water in the pump. If it starts too early, the motor will be burned due to excessive resistance and water hammer in the water pipe. In addition, if the pump is installed in the well, pay attention to the flow of the pump should be consistent with the normal amount of water out of the well, otherwise it will cause the empty machine to run, burn the motor.

Therefore, the correct use of the pump can extend the life of the pump and give people greater benefits!