Ten thousand tons of Baosteel Zhanjiang Steel Project put into operation

On September 25, Hu Chunhua and Zhu Xiaodan inspected the Zhanjiang Iron and Steel Base of Baosteel and witnessed the ignition of No. 1 blast furnace.

After more than 20,000 builders' efforts for more than 860 days, at 10 o'clock in the morning yesterday, Baosteel Zhanjiang Iron and Steel Project No. 1 blast furnace ignited, marking Zhanjiang's 37-year steel dream officially entered a new stage of production.

Yesterday morning, provincial party secretary Hu Chunhua and governor Zhu Xiaodan inspected Baosteel Zhanjiang Iron and Steel Base, listened to the work report of the participating units, learned about the construction of the project on the spot, visited the representatives of the participants, and witnessed the ignition of No. 1 blast furnace. Bao Legang Group Party Secretary and Chairman Xu Lejiang accompanied the inspection.

Baosteel Zhanjiang Iron and Steel Base Project is located in the East Island of Zhanjiang City, with a designed production capacity of 10 million tons. It will produce plates for the automotive, home appliance, machinery and construction industries as well as marine panels, pipeline steel and high-quality carbon structural steel. The initial investment is 50 billion yuan. After the project is put into production, the annual output of steel products is 9.38 million tons, including about 4.48 million tons of hot-rolled commercial materials and 4.9 million tons of cold-rolled sheets. The project started construction in May 2013 and is scheduled to be fully operational in September 2016. Yesterday's No. 1 blast furnace ignition meant that the Zhanjiang Iron and Steel project entered the trial production stage.
This project Zhanjiang has been looking forward to 37 years. In 1978, in order to change the unreasonable layout of large steel plants in South China, the Ministry of Metallurgy began planning in Guangdong, and sent experts to Zhanjiang to investigate and first proposed to build a steel plant in Zhanjiang; but after 37 years, Zhanjiang was the southern coast. The city finally ushered in the steel base that hopes to struggle for decades.

Entrusted by Secretary Hu Chunhua, Zhu Xiaodan, on behalf of the Guangdong Provincial Party Committee and the Provincial Government, expressed gratitude to the relevant national ministries and commissions, people from all walks of life and all the builders who have long been concerned about supporting the construction of the project. He said that Guangdong will continue to vigorously support the project construction and development, and accelerate the construction of supporting facilities and supporting industries. It is hoped that all parties will work together to build Baosteel Zhanjiang Iron and Steel Base into a world-class green carbon steel sheet quality base, and build an environmentally friendly and efficient ecological green steel plant to promote the revitalization of Guangdong's eastern and western regions and promote the transformation and upgrading of China's steel industry. Make due contributions.

Dispel doubt

Will the project change the “blue sea and blue sky” of Zhanjiang?

Since the demonstration of Baosteel Zhanjiang Iron and Steel Project, environmental protection has always been a hot topic of social concern. Many people are worried that the steel project will cause great pollution to the environment. Can Zhanjiang's “blue sea and blue sky” remain the same.
In an interview with the media, Liu Xiaohua, secretary of the Zhanjiang Municipal Party Committee, said many times that the acquisition of Baosteel Zhanjiang Steel Project is an advanced technology steel industry built by Guangdong Province on the basis of eliminating 17 million tons of backward steel production capacity. The backwardness of advanced replacement is a huge contribution to environmental protection.

In an interview with Nandu reporter, Zhanjiang Mayor Wang Zhongbing said that Baosteel Zhanjiang Steel Project has invested nearly 6 billion yuan in energy conservation and environmental protection, and adopted 116 mature and reliable energy conservation and environmental protection technologies. The purpose is to create a low emission, high resource utilization rate, and enterprises and society. Green steel companies sharing resources. Its environmental emission standards are leading in the country, and it is also in the first phalanx level in the world. For example, where dust is generated, it should be collected. In the future, the emission concentration of the chimney should be less than 15 mg; all wastewater should be treated to achieve very good emission standards.

Overcapacity in the steel industry, how to ensure the profitability of the project?

It is understood that Baosteel Zhanjiang Iron and Steel Project originally planned to invest 69.7 billion yuan. However, with the impact of factors such as overcapacity in the steel industry and falling steel prices, the project plan investment was finally reduced to 50 billion yuan.
Zhao Zhouli, chairman of Baosteel Zhanjiang Iron and Steel Co., Ltd. revealed that through the simulation operation, Baosteel Zhanjiang Iron and Steel Project has an investment of about 5,000 yuan per ton of steel; after the project is officially put into operation, it can achieve three years of cash flow, achieve profit in the third year, and reach the profit level of ton steel. Even more than Baosteel's existing similar products.

Zhanjiang Mayor Wang Zhongbing said that in addition to relying on the government's administrative measures, the overcapacity needs to rely on the market and rely on large-scale enterprises, such as Zhanjiang Baosteel's environmental technology breakthrough. Zhanjiang Baosteel adopts the world's leading environmental protection technology--activated carbon sintering desulfurization technology, and the Zhanjiang Municipal Government has placed Baosteel and Zhongke Refining in a partition of 500 meters away from each other, revitalizing the "excess" capacity into a circular economy raw material. Efficient and environmentally friendly.

1. Model Number/Series: Rasp Bar for John Deere, New Holland, Class, CASE, MF machine
2. Dimension/Size: made-to-order
3. Working Condition: For combine harvesters
4. Color: Blue, Green, Blue...all kinds
5. Material: 45# High-quality carbon steel or other material depend on your request
6. Hole: Drilled and not, optional
6. Packing: generally 4 right plus 4 left
7. Certificate: CE and ISO9001
8. Surface: Need Spray-paint or not
9. Place of Origin: Ningbo Zhejiang
10. Function: Thresher Bar. Replace broken ones

Rasp Bar

Rasp Bar, Combine Rasp Bars, Rasp Bars Combine, Agriculture Rasp Bar

Ningbo Combine Machinery Co.,Ltd. , http://www.combine-harvester-parts.com