Let's talk briefly about how to safely operate the CNC wire cutting machine:
1. Before starting the machine, check whether the electrical components are loose. In case of broken wires and parts falling off, the maintenance personnel should be promptly notified.
2. Check the tension of molybdenum wire.
3. Check whether the guide wheel is damaged and exchange the position of the working surface in time. If there is a communication slot in the wire rod, the position of the working surface should be adjusted in time to prevent the wire from breaking.
4 Check that there is enough lubricant in the lubrication area of ​​the machine tool.
5. Turn on the machine's main power supply, controller switch, 24V step-drive power switch and high-pulse power switch.
6, according to the size of the drawings and the actual situation of the workpiece coordinates calculation program, pay attention to the workpiece clamping method and molybdenum wire diameter, choose a reasonable cutting position.
7. Turn on the high frequency switch on the track motor, pump motor and control panel.
8. Place the coarse adjustment switch in the automatic position and pull out the feed switch, that is, enter the processing stage. During processing, further fine adjustment of the fine adjustment switch and fine adjustment of the software is performed so that it is adjusted to the most stable state of processing.
9, after the end of processing should be the first order to turn off the machine's high-frequency pulse switch, water pump switch, close the thick closed storage tube switch, if you want to bring the brake off single press the total power switch red button.
Wafer Dual Plate Check Valve can be lug wafter Check Valve type, wafer one plate check valve type and wafer Lift Check Valve type which widely used in all type of industrial pipelines, such as water treatment, streaming, nitric acid or strong oxidizing property working mediums. Valve size range is from 1/2"(DN15) to 48"(DN1200) matching pressure range from class 150(PN10) to class 2500(PN420). The function of wafer Dual Plate Check Valve is same as any other kind of check valve that to prevent working medium backflow and have much advantages, for example, short face to face dimension, lighter weight, lower water hammer pressure, lower fluid resistance and better sealing performance.
Wafer Dual Plate Check Valve
Wafer Dual Plate Check Valve,Wafer Check Valve,Needle Valvewafer Check Valve,Dual Plate Check Valve
Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com