High Quality Small Item Gear Pump

Model NO.: KCB
Certification: CE, ISO
Max. Temperature: 300 Centigrades
Viscosity: 5~1500 Cst
Max. Pressure: 0.6 MPa
Speed: 740~1470 R/Min
Flow Capacity: 18.3~7600 L/Min
Trademark: Hengnuo
Transport Package: Steel Frame, Wooden Box
Specification: CE, SGS, ISO9001
Origin: Botou City, Hebei Province
HS Code: 8413602990
Gear Pump KCB Series

Specifications:
 
Model		  
Flow		  
Pressure		  
Suction height		  
Speed		  
Motor
m³/h MPa M r/min Model Power
KCB-18.3 1.1 1.45 5 1400 Y90L-4 1.5KW
2CY8-1.1/1.45
KCB-33.3 2 1.45 5 1420 Y100L1-4 2.2KW
2CY-2/1.45
KCB-55 3.3 0.33 5 1400 Y90L-4 1.5KW
2CY-3.3/0.33
KCB-83.3 5 0.33 5 1420 Y100L1-4 2.2KW
2CY-5/0.33
KCB-135 8 0.33 5 940 Y112M-6 2.2KW
2CY-8/0.33
KCB-200 12 0.33 5 1440 Y112M-4 4KW
2CY-12/0.33
KCB-300 18 0.36 5 960 Y132M2-6 5.5KW
2CY-18/0.36
KCB-483.3 29 0.36 5 1440 Y160M-4 11KW
2CY-29/0.36
KCB-633 38 0.28 5 970 Y160L-6 11KW
2CY-38/0.28
KCB-960 58 0.28 5 1470 Y180L-4 22KW
2CY-58/0.28
KCB-1200 72 0.6 5 740 Y280S-8 37KW
KCB-1600 95 980 Y280S-6 45KW
KCB-1800 112 0.6 5 740 Y315S-8 55KW
KCB-2500 150 985 Y315S-6 75KW
KCB-2850 170 0.6 5 740 Y315L1-8 90KW
KCB-3800 230 989 Y315L1-6 110KW
KCB-4100 245 0.6 5 743 Y355M1-8 132KW
KCB-5400 325 989 Y355M1-6 160KW
KCB-5600 330 0.6 5 744 Y355M2-8 160KW
KCB-7000 420 744 Y355L1-8 185KW
KCB-7600 460 0.6 5 989 Y355M3-6 200KW
KCB-9600 570    989 Y355L2-6 250KW
 
Application: 
1.It is widely applied in mining sites, oil reservoirs, factories, piers, ships, and farms. 
2.It can serve as transfer pump or booster pump in oil delivery system. 
3.It is used in fuel supply system as fuel pump for delivery, pressurization and injection. 
4.It always can give performance as lubricating pump in all inustries. 
 
Please Note: 
The temperature of the mentioned fluidity should be below 70°C.
 The viscosity of the mentioned fluidity should be in 5x10-6-1.5x10-3m2/s (5-1500cSt)
 When speed is reduced, it can deliver fluids whose viscosity is up to 55x10-2m2/s (50000cSt) 

Advantages: 
Supported by the following advantages, our pump performs well in many industrial areas, especially in mining. 
1.Designed uniquely and cast with advanced technology, it offers a wide range of capacity from 1m³/h to 60m³/h. 
2.It adopts a new mechanism of gear to transport medium with high viscosity.
 3.This pump performs stably with low noise and high efficiency,thus enjoying long service life.

Structure Features:
KCB series gear pumps are mainly composed of gears,axles pump body,pump,cap safety valve and axle-end seals etc.The heattreated gears have the advantage of higher hardness and intensity,and rotate with the axles inside the replaceable bearing sleeves.All of pump's parts can be lubricated by delivered medium when working.

The pump is properly designed with leakage and return chute,which lets the gears bear the least torque force and reduces load and wear on bearings bear the least torque force and reduces load and wear on bearings in order to raise pump's efficiency.

It is also designed with safty valve for protection against overload.The full return flow pressure of the safety valve is 1.5times higher than the rated exhaust pressure of the pump.It can be also adjusted within the allowance of exhaust pressure range according to circumstances .But please note the safty valve can't be applied as pressure-reducing valve for long time .You may install pressure-reducing valve separately on pipe-line if needed.
 

Cooling (Water) System Quick Connector

Cooling (Water) Quick Connector, Water Piping Connector, Water Tube Fasterning

Linhai Shinyfly Auto Parts Co.,Ltd. , https://www.chinashinyfly.com