1. Stand Alone Type Auto Loaders ,Which hot machine small footprint & light,to be paced directly on other machination container for auto loading,easy&safe to operate
2.Auto loader is used for loading plastic resin to hopper dryer or plastic Injection Molding Machine automatically.
3. The impeller of the ring blower with a unique design is featuring not only for prevention of noise but also more blowing power taking advantage of higher airflow pressure as well as air volume inflow.
4. Separated design of cyclone can collect dust at first and cartridge filter works for filtering dust again by one after another.
5. Limit switch attached to the damper of the cyclone detects resin-lack and automatically transfer material to the cyclone.Â
6.Cyclone made with stainless steel is not only good for prevention of rust but also easy cleaning and material change of different color
7.Microcomputer controller;
8.High-speed provocativeness motor of small foot print an strong-suction force for new material for SNL-300G/SNL-400G.
Safety Protecting And Indication System
Power source phase deficient protection
♦Circuit breaker
♦Pump reversal protecting and indicating lamp
♦Pump over load protecting and indicating lamp
♦Water shortage protecting and indicating lamp
♦Over heat protecting and indicating lamp
♦By-pass pressure lose circuit
♦Cooling compulsory
♦Temperature deviation alarm and indicating lamp
♦Break down alarm buzzer
| Specifications |
| Product Model | 300G | 400G | |
| Motor Type | carbon brush | Induction | |
| Motor Specifications | 1KW /1.3HP1 ¢ | 0.75K 380,3P | |
| Conveying capacity(kg/hr) | 300 | 330 | |
| Loading distance(m) | 3.5 | 4 | |
| Static wind pressure(mm/H2O) | 1300 Â Â | 1400 | |
| Reservoir volume(L) | 7.5 | 10 | |
| Conveying tule inner dia(mm) | ¢38 | ¢38 | |
| Attached hoses(mm) | ¢38mm*3.5m 1pc | ¢38mm*4m 1pc | |
| Dimensions cm | 340*340*590 | 780*450*450 | |
| Weight KG | 12 | 26 | |
Any question,please call me.Â
MOB&waspp: +8613773240086
1. High Precise Control
The servo system can control the machine's pressure, speed & location precisely, make sure that the error of accurate repeatability precision for the shot measurement is <0.3%
2. High sensitive response
Because the motor vector is matched with the controller accurately, it only takes 0.5sec. inputing the number from 0 to max. Compared with other traditional hydraulic injection molding machine, AF series is more faster in speed with shorter cycle time and high efficient in production
3. Low noise
Compared with traditional fixed pump & variable pump system, the noise is 1/10 lower under normal circumstance, more suitable for sealed dustless workshop
4. Energy Saving
Overall efficiency is 10% more & driving capacity is 18% more than common machine. This series can save 30-80% energy, and achieve first-class energy efficiency
5. Water cooling saving
The system condition prevent high pressure uploading without any power output, leads to the water cooling saving
Servo Plastic Injection Molding Machines
Servo Energy-Saving Injection Molding Machine, Servo Power-Saving Injection Molding Machine
Ningbo Konger Machinery Co., Ltd. , http://www.kongerchina.com