Sweeper, there are a lot of people call sweeper, sweeper, sweeper sanitation, etc., along with sanitation efforts continue to increase, many cities have adopted the use of mechanical cleaning instead of manual cleaning, but for the water truck, garbage truck For other sanitation vehicles, the operation of the sweeper is relatively complicated, that is, some small problems will be more troublesome than sprinklers, etc. In order to avoid these minor problems causing minor troubles to cause the vehicle to not work properly, it will bring sanitation work to the city. Trouble, we must understand some of the small details about the operation or use of the sweeper.
1. Sweeper both sides are generally scan disk design, an operator according to the actual situation, if selected appropriately adjusting the left and right scan disk scan disk simultaneously. According to the working environment of different road sections, whether to spray water to reduce dust is needed. In the work, properly choose the function of the cleaning vehicle, which can save costs, save fuel and avoid waste
2. Each function button of the sanitation sweeper is on the operation panel in the cab. The transition time between the buttons is about 5 seconds. Do not press it frequently. When it is found that the hydraulic components of the sweeper cannot work properly, the oil circuit and circuit of the sweeper must be inspected. The troubles that can not be solved by the sweeper driver himself must be promptly sent to the maintenance point for professional maintenance, and they must not be operated on their own, so as not to cause artificial damage to the sweeper spare parts.
3. The sweeper driver must have a certain sense of responsibility. He must pay close attention to the abnormal work of the sweeper during the work. After the work is completed, the sweeper must be cleaned and cleaned. Some dust in the dustbin of the sweeper needs manual handling.
In fact, the road sweeping vehicle is a special type of special environmental sanitation vehicle that has emerged in recent years. It uses the main and auxiliary engines to provide power for cleaning and cleaning of the sweeper. The control valve also divides the main and the auxiliary. The power of the main valve comes from The main engine manages the running of the vehicle, the tilting of the carriage and the opening and closing of the rear door, the power of the auxiliary valve from the secondary engine, the management of the sweeper, the work of the sweeper and the sucker. As operators of sweeping vehicles, in addition to mastering the operational skills of general vehicles, they must master the special function operations of the sweeper to avoid mistakes and damage the sweeper parts. Above we just briefly analyzed some points that need attention in the early operation of some cleaning vehicles and hope to be helpful to everyone.
Hubei Jiangnan Special Purpose Vehicle Co., Ltd. specializes in the production of special environmental sanitation vehicles such as road sweepers, sweepers, pure suction sweepers, and guardrail sweepers. In our company, you can purchase all environmental sanitation vehicles.
Welcome to reprint, this article URL:
Stationary Scissor Lift:
8.0t Basement Small Cargo Lift is used for transfer cargo between different floors.
55t 60t 65t Stationary Lift Table can install on the ground directly or make one pit. Hydraulic drive, steady working and simple operation.
Cheap Fixed Lift Table could be controlled at any floor. Control panels are available at the designated floors and one is on the lift platforms.
Stationary Scissor Lift Specification Table:
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG0.5-4.5 |
750 |
4500 |
500 |
2000*1000 |
SJG0.5-5.0 |
850 |
5000 |
500 |
2000*1000 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG1.0-3.3 |
840 |
3300 |
1000 |
1900*1500 |
SJG1.0-4.3 |
860 |
4300 |
1000 |
2500*2500 |
SJG1.0-4.5 |
850 |
4500 |
1000 |
2000*1500 |
SJG1.0-6.0 |
1230 |
6000 |
1000 |
2200*1500 |
SJG1.0-7.5 |
990 |
7500 |
1000 |
2200*1800 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG2.0-3.5 |
1000 |
3500 |
2000 |
2200*1500 |
SJG2.0-4.5 |
900 |
4500 |
2000 |
2200*1500 |
SJG2.0-4.8 |
700 |
4800 |
2000 |
3600*2000 |
SJG2.0-6.8 |
1400 |
6800 |
2000 |
2550*2200 |
SJG2.0-7.5 |
1065 |
7500 |
2000 |
2400*2400 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG3.0-4.5 |
1060 |
4500 |
3000 |
2200*1800 |
SJG3.0-7.2 |
860 |
7200 |
3000 |
5500*3000 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG4.5-3.5 |
760 |
3500 |
4500 |
4000*2000 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG5.0-1.8 |
960 |
1800 |
5000 |
3500*2500 |
SJG5.0-5.4 |
950 |
5400 |
5000 |
5000*1600 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG8.0-2.5 |
850 |
2500 |
8000 |
6500*4500 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG12-3.0 |
950 |
3000 |
12000 |
5500*2800 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG15-4.5 |
1150 |
4500 |
15000 |
8000*2200 |
MODEL |
MIN. HEIGHE (mm) |
LIFT HEIGHT (mm) |
LIFT CAPACITY (kg) |
PLATFORM SIZE (mm) |
SJG20-5.0 |
1200 |
5000 |
20000 |
6000*3000 |
Application Area:
Stationary Scissor Lift is mainly used in the production line and the storehouse papermaking medicine and other industries. It can be used as the delivery lift to transport goods smoothly, safely, reliably and conomically.If you have any questions, please contact with us directly. Stationary Scissor Lift are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.
Stationary Scissor Lift
Hydraulic Scissor Lift,Stationary Cargo Lift,Stationary Scissor Goods Lift,Scissor Cargo Lift
Jinan East Machinery Co.,Ltd. , http://www.jneastmach.com