For the best period of time when driving a commercial vehicle, suddenly the brake anti-lock brake system will have a feeling of starting. This situation may be due to the yaw caused by the brake disc of a commercial vehicle. In fact, you can go through the actual use of the vehicle, and then eliminate it by correcting it or resolving it. When the speed of the commercial vehicle is increased to 120km/h, then gently brake the vehicle, then reduce the speed of the commercial vehicle to 30km/h, and then try repeatedly several times. Then, the brake shake that occurs when driving a commercial vehicle under high speed conditions will gradually be eliminated. This kind of use, the economy is only suitable for the use of high-speed brake shake will appear relatively weak, and the duration will not be very long. The amount of deformation is relatively large, and after the overheating, the brake pads that have caused the hardening of the marking lines have almost no effect.
When a commercial vehicle is driving almost 10,000 kilometers or more, it suddenly discovers that the vehicle's hub will have a very heavy brake powder. This may be due to the relatively soft brake pads of the vehicle. In fact, most vehicles will also be like this. If the quality of brake pads for commercial vehicles is too hard, then it will be easier to cause damage to the brake discs of commercial vehicles.
When the number of miles of a commercial vehicle is driven to a certain distance, can the front wheels and the rear tires be used interchangeably? When the tire of a commercial vehicle is undergoing transposition, it will require the replacement of the tire during a period of 10,000 kilometers. If the degree of pattern wear between the forums is relatively uniform, then the time for replacement may be slightly. Extend something. Because the pattern of the tire is not the same, it is not the same when performing the transposition.
Feature:
1. The main material used is polyurethane.
2. Effective travel is 2300*1250*200mm(X*Y*Z)
3. Standard bench 2000*1000*900mm(L*W*H)
4. Use the HT600 hybrid head.
5. The width of the rubber strip after foaming is 8mm-30mm.
Advantages:
1. Temperature holding system( no need air conditioner room.)
2. Tapping water cleaning system( no need chemical cleaning liquid)
3. Patented Anti-blocking gluing nozzle.
Industrial Foaming Machine,Silicone Gasket Foaming Machine,Foam Sealing Machinery,Silicone Foaming Machine
JINAN EURO-ASIA INT'L CO., LTD , https://www.eaelectricmachine.com