Dongfeng special business front four rear four tank car chassis detailed parameters: the use of Dongfeng special business small three-axis. New luxury interior cab, large logo LOGO, high-strength bumper, Yuchai 220 horsepower, 5T front axle, 280 beam, ( Kang machine 210 horsepower, 3.6T front axle, 250 beam) with ABS, speed limiter, disc brake. Shaanxi tooth 8 gear box, 10.00R20 wire tire.
Tank modification parameters: the maximum volume of the tank: 27.3 square, (can be loaded with 23.2 tons of diesel) with two tanks of the same length of suction pipe, special oil pump, with locks, fire extinguishers, fire helmets and so on. The top of the tank has a telescopic guardrail and a pattern walkway. The tank body is made of 6mm thick high-quality large-scale carbon steel sheet, which is completely formed by seamless molding. It has European standard tank mouth and submarine valve (optional bottom port according to local policies and requirements, probe probe, oil and gas recovery) ). The tank and each bumper are attached with visual reflective strips, and the word "explosion" is attached. Our factory has passed the ISO9001-2000 international quality system certification, and the products have passed the 3C certification. It is a well-known brand in Hubei Province and a reliable product in Hubei Province.
Total mass (Kg) 24300
Tank volume (m3) 23
Rated load mass (Kg) 15350
Dimensions (mm) 10250, 10550 × 2490 × 3300
Curing quality (Kg) 8755
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 30/11
Front overhang / rear overhang (mm) 1250/2800, 1450/2600
Number of axes 3
Wheelbase (mm) 1950+4000, 1950+4250, 1950+4550, 1950+4950
Axle load (Kg) 6500/6500/11300
Maximum speed (Km/h) 80
Others 1, transportation medium: gasoline, category number: 3, density: 700 kg / cubic meter; effective volume of the tank: 23 cubic meters, tank dimensions (mm): 7500 × 2450 × 1750, 7800 × 2400 × 1700 . Shape length / wheelbase / front overhang / rear overhang / tank size (mm) Correspondence: 10250/1950 + 4250 / (1250 / 2800, 1450 / 2600) / 7500 × 2450 × 1750; 10550/1950 + 4550 / ( 1250/2800, 1450/2600) / 7800 × 2400 × 1700. 2, side protection left and right symmetry using cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 100mm, a section width of 50mm, and a lower edge of 500mm from the ground. 3. Optional cab with chassis, only the chassis with radial tire, speed limit device and front disc brake; the vehicle should be equipped with a tachograph with satellite positioning function; ABS model: 4S/4M, manufacturer: Wilbur Branch Automotive Control Systems China Ltd.; engine and fuel consumption (L/100Km) correspondence: ISB190 40/39.31, ISB210 40/39.42, YC6J220-46/40.55.
Auman's first four rear tanker tanks effective volume: 25 cubic meters, the maximum volume of 27 cubic meters, tank dimensions (mm): 7400 × 2450 × 1800. 210 horsepower machine country four engine, Datong seven gear shift Box with power take-off, 10 tons rear axle, 10.00R20 steel wire tire, ETX2200 flat top, 380L aluminum alloy fuel tank, air conditioning, front disc brake, ECU electronic speed limit, ABS, exhaust pipe front.
ã€The main technical parameters】
Product trademark Chusheng
Bulletin Lot 257
Product Name CSC5253GYYB4 Oil Tanker
Product No. ZL2NN4D701W
Total mass (Kg) 25000
Tank volume (m3) 25
Rated load mass (Kg) 16700
Dimensions (mm) 10350×2490×3350
Curing quality (Kg) 8105
Cargo size (mm) × ×
Rated passenger (person)
Quasi-trailer total mass (Kg)
Number of passengers in the cab (person) 3
Load mass utilization factor
Approach angle / departure angle (°) 18/13
Front overhang / rear overhang (mm) 1365/2325
Number of axes 3
Wheelbase (mm) 1860+4800
Axle load (Kg) 6750/6750/11500
Maximum speed (Km/h) 79
Others 1, transportation medium: gasoline, category number: 3, density: 700 kg / cubic meter; effective volume of the tank: 25 cubic meters, tank dimensions (mm): 7400 × 2450 × 1800. 2, side protection around Symmetrical use of cold-formed steel / Q235, bolted. The rear protection is made of cold-formed steel/Q235, welded, with a section height of 100mm, a section width of 50mm, and a lower edge of 500mm from the ground. 3. Only use the chassis with radial tire, speed limit device and front disc brake; the vehicle should be equipped with a tachograph with satellite positioning function; ABS model/manufacturer: ABS-E, 3550X-1010 WABCO car control system ( China) Co., Ltd., Dongfeng Electronic Technology Co., Ltd.; engine and fuel consumption (L/100Km) correspondence: ISDe210 40/37.23, ISDe245 40/37.31. (This article comes from Xiagong Chusheng)
ZGB(P) series Centrifugal Slurry Pump with horizontal, vertical axial middle opening, double casing structure can also be used as mineral processing pump. It can be operated in a wide variety of applications: mining and mineral processing, highly abrasive slurries, cyclone feed, Semi-autogenous Grinding/Autogenous Grinding mill discharge recirculation duties, mine refuse and tailings, industrial processing, mining duty abrasive slurries, in-plant slurry transfer pumps, lime slurry, alumina etc.. The benefits of using ZGB(P) series pump to customers are numerous: life time cost saving, low power consumption,long wear life, reliability in operation.The ZGBP type is multi-stage pump(three or four stages).
Product Feature
1. Robust construction and design.
2. Closing both back and front impeller running clearances permits optimum continuous performance of the pump.
3. Expeller seal combined with packing and mechanical seal have been used.
4. A number of pumps can be connected in series for use.
ZGB(P) Series Mineral Processing Pump
ZGB(P) Series Mineral Processing Pump,Mineral Processing Pump,High Chrome Mineral Processing Pump,Mineral Processing Slurry Pump,ZGB(P) Series Pump For Mineral Processing
Shijiazhuang Soarho Machinary Co.,Ltd , https://www.xhslurrypump.com