Liang Shu explosion-proof blower features and installation process

The features and installation process of Liang Yi explosion-proof blower are introduced in detail
Explosion-proof blower performance characteristics:
1, easy to install
Explosion-proof blowers can be installed at the place of use for compressed air or for evacuation. And can install any horizontal or vertical direction.
2, strong structure
Explosion-proof blower body is made of ADC12 aluminum alloy casting, which is different from common iron shell or blower made of AC10 aluminum alloy. The material of ADC12 is the same material as that of Mercedes-Benz car wheel drum, which is more durable.
3, high reliability
Except for the impeller, the explosion-proof blower has no other moving parts, and the impeller is directly connected to the motor and has no gear or transmission belt, so it is highly reliable and almost maintenance-free.
No oil and gas, no pollution, when the impeller rotates, it does not come into contact with any naked, no lubrication, so it can guarantee 100% no oil and gas.
4, low vibration
Explosion-proof blower parts are imported from Germany and Japan. The parts in the running part have been designed with extremely precise balance. The vibration rate is very low due to testing and calibration.
5, low noise
Explosion-proof blowers use high-pressure and low-noise motors for direct transmission, and the entrance and exit have built-in silencer devices, which can reduce the noise during operation.
Explosion-proof blower installation process:
1. Explosion-proof blower should be installed in a strong and stable place on the ground. There should be sufficient space around it to facilitate inspection, maintenance and maintenance.
2, explosion-proof blower base should be maintained under the foundation level, the base of the four corners suggested that the cushion rubber or cushioned cast to ensure that the explosion-proof blower running smoothly, vibration is small.
3, explosion-proof blower and the system's connecting pipe should be sealed reliably, can be used for small vacuum pump metal pipe connection gasket with oil rubber, for medium and small pressure fan can be used vacuum hose connection, pipe diameter should not be less than medium pressure fan suction caliber , And require the pipeline to be short and less elbows. (Welding slag in the pipe should be removed when welding the pipeline. Welding slag is forbidden to enter the vacuum pump chamber.)
4. In the connecting pipeline, the user can install the valve and vacuum gauge above the inlet of the medium pressure fan and check the extreme pressure of the explosion-proof blower at any time.
5. Connect the power supply according to the motor's signage requirements, and connect the grounding wire and fuses and thermal relays of appropriate specifications.
6. When the explosion-proof blower is powered on, the motor belt must be removed to confirm that the vacuum pump is in compliance with the specified direction before it can be put into use. The medium pressure fan is used for reverse injection. (Turn to the direction indicated by the hood)
Liang Yi explosion-proof fan - understand your explosion-proof fan, your private custom fan, such as our products are interested, please call our service hotline to consult buy!

A Metal Cutting CNC Router is used to engrave metal. Most metal or non-metallic materials can be processed.
The laser is processed by a non-mechanical "tool". It does not produce mechanical extrusion or mechanical stress on the material, no "tool" wear, is non-toxic, and rarely causes environmental pollution.
The laser beam is very thin, so that the consumption of the material to be processed is small.
When processing, X-rays are not generated as in the processing methods such as electron beam bombardment, and are not interfered by electric fields and magnetic fields.
It is easy to operate and can be automated using microcomputer numerical control technology. It can be used for high-speed and high-efficiency machining of parts on the production line and can be used as part of a flexible processing system.
Fine precision machining is possible using a precision table.
Use the microscope or camera system to observe or monitor the condition of the surface being machined.
It can be processed through its light-transmissive materials (such as quartz and glass).

Metal Cutting Cnc Router

Metal Cutting Router,Sheet Metal Cnc Router,Cnc Metal Cutting Router,Router For Metal Working

JINAN YIHAI CNC ROUTER MACHINERY CO.,LTD , https://www.yhcncrouter.com