Two-in-one lightning arrester installation precautions

The two-in-one lightning protection device is a special lightning protection device tailored to the IEC lightning protection requirements and the specific characteristics of the surveillance system camera. It is applicable to the lightning protection of power supply and video lines of fixed cameras and infrared ones in the monitoring system. Surge) protection.

Two-in-one lightning arrester installation precautions:

1. Two-in-one lightning arrester is connected in series.

2. The surge protector input terminal is connected to the outside line, and the output terminal is connected to the input terminal of the protected device.

3. The product should match the working voltage of the protected equipment. Please connect it according to the installation diagram when installing.

4. The components of the lightning arrester are strictly inspected, and no special maintenance is required at ordinary times. When carrying out fault detection, remove it. The resistance between the measured input and output should be ≤ 6Ω, and the resistance between various cores to ground. Should be ≥10ΜΩ. If the measured data does not meet the above requirements, it means that the product is faulty and should be replaced in time to ensure the safety of the equipment.

5, lightning protector grounding wire to be well grounded, grounding wire should be as short, thick, straight, grounding resistance should comply with relevant national standards.

6. During the use of the SPD, the SPD should be regularly tested for lightning protection. If a fault occurs, it should be repaired or replaced in time to ensure the safety of the device.

7, non-professionals do not disassemble.

The company is committed to research and development of lightning protection technology, after years of research and development, using advanced lightning protection technology, follow the International Electrotechnical Commission and domestic standards, the use of advanced surge protection devices for industrial production, developed with representatives Orden own brand lightning protection products. The product was underwritten by China Pacific Insurance Company and relieved the customer's worries. Our company's self-produced Lei Chuang orden lightning protection products and other world-renowned brands of lightning arresters are widely used in the telecommunications, medical, aviation, security, finance, securities, transportation, petrochemical, and meteorological industries, and through us The unremitting efforts, won the user's good reputation!