PRODUCT INFORMATION
Brief introduction:
The roll forming machines can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
The chart of Process Flow and components
Manual uncoiler- Roll forming machine- Computer control system- Hydraulic control system- Form cutter
Advantages of the roofing sheet roll forming machine
1. High efficiency
2. Lower cost
3. Long life time: 30years
4. Low energy consumption
5. PLC control, Panasonic or Siemens or eura
6. Easy operation
7. Beautiful and best quality
Â
| 1. Genaral | |
| Material: | Galvanized Coil, Aluminum |
| Material Thickness: | Â 0.3-0.5mm |
| Main roll forming machine Power: | 11 KW |
| Forming Speed: | 10-12m/min |
| Feeding width: | 229mm |
| Production line G/W: | 12.5T |
| Production line length: | about 38m |
| 2. Working Flowing | |
|
 | |
| 3. Technical Parameter | |
| 3.1 Decoiler | |
| Decoiler Type | Manual |
| Loading capacity | 3Ton, Impassive to expanding |
| 3.2 Roll Forming system with feed panel unit | |
| Axis Diameter | 50 mm |
| Forming Roller station | 36+1 groups |
| Main Axis material | First grade 45# steel,heated and quenched |
| Roller material | First grade 45# steel, Hard Chrome Coated, 2um heated and quenched |
| Pillar size | 42*45mm |
| Forming Speed | 10-12 m/min |
| Drive Type | Gear box |
| Machine Frame stand | Welded structural steel, thickness 12mm |
| 3.3 Cutting Device | |
| Cutting type | Panasonic Servo tracking cutting |
| Cutting system power | 2.2KW |
| Cutting length tolerance | ±0.5mm |
| Â | Â |
| 3.4 PU Foaming Untit | |
| PU Raw material tanks | A+B China good brand |
| Â | Â |
| Â | Â |
| 3.5 Electrical System | |
| PLC system | Japan PANASONIC/DELTA |
| Length Controller | Â Japan PANASONIC |
| Operation | Touch Screen PANASONIC/DELTA |
| Inverter | Japan PANASONIC/DELTA |
| Voltage | 380V/50Hz/3P |
Super oil treatment:
1. Contains the most latest advanced engine additive, including super additive, persistent lubricant and anti corrosion, etc.
2. Improves the lubricating oil viscosity coefficient, and prolong life of Engine Oil.
3. Forms a oil film, can effectively prevent the direct inter-metal friction, reduce mechanical wear and tear, and make the engine achieves the best protection.
4. It`s anti-aging, anti-rust, attenuation and neutralize acidity, making the bearings, valves, piston rings, cylinder wall have good lubricity in any case.
5. Its special lustration component can prevent sludge cohesion and clean engine to enhance engine power, and reduce mechanical resistance to decrease the loss of fuel.
Direction:
1. Stop the engine, then add this product to the engine oil
2. Use one can of treatment for low mileage engines, and two cans for worn engines.
Caution:
1. Keep away from Children;
2. Operate in ventilated place;
3. Store the product in the place under 40 centigrade;
4. Don't put it in the car and keep away from heat and fire.
Engine Oil Treatment Additives,Car Oil Treatment,Engine Oil Additive,Engine Oil Treatment,Oil Treatment For Car
Guangzhou Lidi Automobile Supplies Co., Ltd. , https://www.lambosscn.com