Vacuum pump filter is a vacuum pump in the filtration equipment, is an important filter parts, the filter effect is mainly depends on the performance of the filter. So how to maintain and maintain the vacuum pump filter?
Vacuum pump filter, the main filter in the operation of the vacuum pump in three forms:
1, air intake filter (can effectively prevent the solid particles and fine ash is sucked into the vacuum pump to reduce mechanical wear and improve operational reliability in prolonging the life of the pump can also effectively protect the system components.
2, exhaust filter (taking into account the exhaust resistance, dust holding capacity, oil and gas separation performance, the three legislation required to achieve the best balance of different internal and external locations to use different materials to achieve the purpose of separation)
3, oil filter (for the vacuum pump oil filter to extend the use of oil mainstream filter, installed in the oil)
Use and maintenance methods:
In terms of cleaning and replacement, a lot of people can not get what they want, and they often spend energy in vain, but they have not received any good results.
1, Loosen the knob bolt to separate the filter housing from the head. Be careful not to lose rubber seals and fibrous washers.
2, carefully remove the spring and felt pads, and then remove the paper over the core.
3, with a brush to remove the filter crease in the dust and foreign matter, and then gently tap the hand so that the remaining dust fall, wipe the dust on the inner wall of the shell and fiber mat.
4, according to the order of disassembly will have been cleaned or a new filter cartridge back.
Servo Injection Moulding Machine,Hight Speed Injection Machine,Servo Energy Saving Injection Machine,Two Plate Machine
Demark(changxing)injection system CO. LTD , https://www.petplas.com