Due to the increasingly advanced environmental sanitation equipment of today's cities, and the level of knowledge and skills of practitioners that cannot keep up with the pace of equipment update iterations, many practitioners do not understand the process of operating the relevant professional models, which in turn has the opposite effect of reduced efficiency. In order to strengthen the learning of employees, the operational flow of professional vehicles should be popularized as soon as possible. Then, for the self-loading garbage truck , let's briefly learn about the garbage dumping process.
First, pull the garbage truck brake and hang the neutral position, and confirm that the engine is in working condition. The power take-off handle will be operated to the power take-off position and the clutch will be depressed. When the clutch is released, the gear pump operation will be started. It must be emphasized here that to ensure that the power take-off is fully engaged, the handle must be pushed down.
Second, unlock the rear door, need to pull the rear door lock handle to the fully open position. After pulling the uninstall handle to the unloading position, the freight car will be turned over and the waste will be discharged from the carriage itself.
3. When the dumping of the garbage is completed, the carriage is turned over to the sub-frame, and at this time, the unloading handle must be pulled to the reset position. After the reset is completed, the rear door locking handle is then pulled to the locked position to lock the rear door securely.
4. When the work flow is completed, the user can step on the clutch and pull the power take-off handle to a separate position. Here still pay attention to ensure that the power take-off is completely out of engagement and the handle must be pulled to the disengagement position.
5. In addition, attention must be paid to the waste dumping process. Make sure there are no people who enter the dumping area during unloading. When dumping, check whether the locking device of the door lock is in the open state, and continue to operate step by step in the open state. After the reset, the rear door should also be locked.
We firmly believe that on the basis of this study, we can make a simple expansion of the professional knowledge stocks of sanitation practitioners. At the same time, we will gradually increase their actual work ability in practical operations to avoid various types of losses and losses caused by mistakes. In the end, the best benefits of self-loading garbage trucks can be fully utilized.
Flatbed Laser Cutting Machine
UTECH flatbed Laser Cutting Machine works with high power Co2 laser tube, with function of cutting and engraving. Laser tube moves following the design of files, without power wasting, keeping machine work with same power on each position of working table. It gives better engraving and cutting result.
Large format could be used in many industry lines like acrylic cutting, fabric cutting, etc; it can also work well in aircraft engraving &designing, toy making, and many other non-metal materials.
>> Machine Features >>
1. CO2 Glass sealed laser tube
China famous brand (Reci, Yongli), good beam mode stability, service time over 1500~8000 working hours.
2. Laser Power
40W~180W, good quality and stable output to extend the laser tube service time.
3. Singapore imported lens and mirrors
High transmittance, good focusing, reflecting effect.
4. DSP control system, Leetro Controller
Ruida USB controller. USB interface, support online/offline working, English language system, adjustable cutting speed and power.
5. High accuracy stepper motors and drivers. Belt transmission
6. Aluminium blade table
7. Taiwan Linear guide rails
8. Lasercut 5.3 software, user`s manual
9. Tool box
>> Equipment coming together with machine >>
1. Industrial Cooling System
Constant water temperature ensures laser tube a longer service time and high stability
2. Exhaust Fan
Exhaust fan removes dust and smoke to protect the optical parts and the users.
3. Electromagnetic air pump
The air blowing protects the lens from smoke and dust pollution. Also it protects the material being processed from fire or burned.
>> Options >>
1. Red dot
The laser is invisible. Red dot shows the position of the laser on the material. It's more convenient for location.
2. Honeycomb or blade table optional
Aluminum blade table is for processing acrylic, wood and other hard materials;
Honeycomb table is for processing cloth, leather and other soft materials.
3. Up/down Z-axis
You can adjust the table height by operating the Z-axis to process thick materials. Z-axis is also a must when you need to use auto focusing and rotary.
4. Auto focusing
Auto focusing automatically adjust the focusing distance.
5. Rotary
Rotary is used when processing cylindrical objects like bottles, cups, sticks, etc.
>> The functional of optional spare parts>>
1. up and down platform: to process more thickness materials,above 5cm;
2. Rotary device:to engrave cylinder object
3. Auto focus: to check the focal length automatically
4. Red dot point: to see the sight of laser light
5.Chiller cw-3000/5000/5200: to cool the laser tube better, so that extend lifespan of it
6. Dual heads: to improve the working efficiency
<
Machine model:
UT-1325 laser cutting machine(Optional)
Laser type:
Sealed CO2 laser tube, wavelength: 10.64μm
Laser power:
80W / 100W / 150W / 180W
Cooling mode:
Circulating water cooling
Laser power control:
0-100% software control
Control system:
DSP offline control system
Max. engraving speed:
60000mm/min
Max cutting speed:
50000mm/min
Repetition accuracy:
0.01mm
Min. letter:
Chinese: 1.5mm; English: 1mm
Table size:
1300x2500mm
Working voltage:
110V/220V,50~60Hz
Working conditions:
temperature: 0-45°C, humidity: 5%-95%
Control software language:
English / Chinese
File formats:
*.plt,*.dst,*.dxf,*.bmp,*.dwg,*.ai,*las, *doc
Flatbed Laser Cutting Machine
Flatbed Laser Cutting Machine,Flatbed Co2 Laser Cutting Machine,Flatbed Laser Cutter,Metal Flatbed Laser Cutting Machine
Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com