Magnetic pump with its full seal, no leakage, corrosion-resistant features, widely used in petroleum, chemical, pharmaceutical, electroplating, environmental protection, water treatment, film and television printing, defense and other departments for pumping flammable, explosive, toxic and valuable liquid , Is to create a leak-free, non-polluting civilized workshops, civilized factories ideal pump.
Magnetic pump installation process to take into account the following:
1. The unit on the basis of the base plate and placed between the wedge pad, wedge pad by adjusting the level to find the pump. After adjusting, tighten the anchor bolts.
2. Pump and motor should be checked before installation, all parts should be intact, magnetic pump should be no debris.
3. According to the basic size of the concrete foundation, at the same time to be buried good anchor bolts.
4. Magnetic pump suction, discharge pipe should be brackets, can not be used to support the magnetic pump. Import and export pipe diameter should be consistent with the pump import and export caliber.
5. Installation is completed, the last hand to turn the magnetic pump coupling, check whether the phenomenon of rub touch, turn the installation is completed easily.
6. Magnetic pumps are strictly prohibited with the extraction of particles and easy to crystallize the media, does not allow the closure of the discharge port in the case of continuous operation, the need to maintain a minimum flow.
7. In order to prevent debris from entering the magnetic pump, a filter should be set at the inlet, and the filtration area should be more than 3 ~ 4 times of the pipe cross-sectional area.
8. Medium viscosity is too high, the magnetic pump performance, power will change, please follow the instructions for details.
9. Must ensure that the installation of magnetic pump height in line with the pump NPSA, and consider the pipeline loss and the media temperature.
More keyword search: Magnetic pump
Tipping machines,
Our Tipping machines is used to tip the tipping film on both end of shoelace, or bag handle rope lace. there is fully automatic Tipping Machine. We have max 1.5meter, 2meter, 2.5meter according to customer demand. We also have semi auto tipping machine, which have no length limited, but need one operator to work.
The advantages of the tipping machines,
1, the processing temperature can be adjusted automatically, normally in 50°to 60°.When reaching the set temp, it will be fixed automatically.
2, the main motor has the overload protection function.
3, the machine is equipped with special safety device and the base of the mold is made of high quality casting, so, the mold can be used for a longer life.
4, strong structure and safe operation and good materials and good brand electrical parts, technically and mechanically, the whole machine can be used for at least 20 to 30 years without any problems.
5, the machine has the function of programming protection, under which function the machine parts will not be easily broken because of reverse or wrong power connection. When power cable is wrongly connected, the machine will not run.
6, the machine will stop working automatically when there is no tipping film feeding, under which function the machine idle running will be avoided.
Tipping Machine
Tipping Machine,Tipping Film,Automatic Tipping Machine,Transparent Tipping Film, semi auto tippin machine
DongGuan FeiYang Packaging Machinery Equipment Co., Ltd , https://www.feiyang-machinery.com