Wuxi issued the first national lighting local regulations

From October 1st, the “Wuxi Urban Lighting Regulations” will be officially implemented. This is the first local lighting regulation in the country. In the future, after the street lighting in the community reaches the relevant standards, the electricity bill can be paid by the government. According to the relevant personages of the Municipal People's Congress, this kind of creative people's livelihood legislation is more public opinion. It is clear that the road lighting in the residential area is functional lighting, and it is included in the unified management of the urban lighting system. It is a Huimin initiative different from other provinces and cities, and responds to people's livelihood. look forward to. Years of lighting in the residential area of ​​the main city area Ten thousand residential areas lighting is a semi-public product, the government should not bear, how much? Previously, at the pre-assessment meeting of the first implementation of the regulations by the Municipal People's Congress, the cost of the streetlights in the community led to a heated discussion between the deputies of the people's congress and the representatives of the citizens. The "Regulations" absorbed the opinions of the masses. Article 21 stipulates that the lighting facilities in residential areas can be transferred to the relevant government departments for management, subject to the relevant conditions. According to industry insiders, according to this regulation, the municipal government will bear nearly 10 million yuan in electricity and maintenance fees for about 30,000 lighting facilities in the residential area of ​​the main city. At present, the road lighting facilities in some residential areas are not in compliance with the conditions for transfer, and should be implemented as soon as possible in accordance with the requirements of the Regulations. Relevant persons from the Legal Work Committee of the Municipal People's Congress Standing Committee said that the city's urban lighting industry is developing rapidly, and the green lighting work is at the leading level in China and the province. The "Regulations" not only raises the city's good experience and practices in urban lighting to Local laws and regulations also strive to solve new problems encountered in development. The light pollution control written regulations were praised by Wang Xiaohua, who lived near Zhongshan Road, and suffered from the light pollution from the opposite high-rise buildings. After the curtains were pulled up in the evening, the room was still as white, and he often slept badly. His family had complained to the relevant departments many times. Knowing that the "Regulations" clearly stipulate strict control of light pollution, he repeatedly praised. In response to the light pollution problem that the general public is concerned about, the "Regulations" specifically puts forward three specific requirements for setting up landscape lighting facilities that should meet the requirements of light pollution control and coordinate with the surrounding environment. Chen Daqing introduced that in the actual operation in the future, the lighting design scheme, lighting method and installation position will be strictly controlled, and measures such as reducing the light pollution can be directly taken against the window of the residents and reducing the power of the building lighting. . Promoting urban lighting sensor monitoring technology Attentive citizens found that the traffic in Taihu New City at night was low, and some roads such as Wuhu Avenue and Gonghu Avenue closed the road lights, which did not affect lighting and saved energy. Such intelligent control systems, district, time-sharing, and grading energy-saving control measures are required by the Regulations. The energy consumption caused by urban lighting is also one of the focuses of the people. In order to promote the construction of a conservation-oriented society and the work of urban green lighting, the "Regulations" clearly require innovative energy-saving modes, encourage urban units and houses on both sides of the landscape rivers to reduce the energy consumption of other landscape lighting and encourage the adoption of new energy sources. Scientifically apply renewable energy such as solar energy and wind energy, promote high-efficiency light sources and lamps, prohibit the use of high-consumption and low-efficiency lighting products, and eliminate high-consumption and low-efficiency lighting facilities within a time limit. According to relevant persons from the Municipal Lighting Management Office, the city has completed the sensory monitoring of the public lighting facilities in the main city, realizing the unified control of street lights, landscape lights and other ancillary facilities and 24-hour monitoring, and installing more than 1,100 sensing terminals. It is planned to implement technology promotion in Huishan, New District and other places, give full play to the advantages of sensor network technology and maximize energy conservation. "Wuxi City Lighting Regulations" will be implemented from October 1st, "Wuxi City Lighting Regulations" will be officially implemented. Yesterday, the Wuxi Municipal People's Congress Standing Committee and the Municipal Government held a working conference on the implementation of the "Regulations" and deployed implementation work. Wang Liren, deputy director of the Standing Committee of the Municipal People's Congress, Wu Fengfeng, and deputy mayor Zhu Aixun attended the meeting. The "Regulations" raised the good experience and practices in urban lighting work in Wuxi City into local laws and regulations, conformed to the people's livelihood expectations of the people's urban lighting improvement living environment, adapted to the rapid economic and social development of the city and the continuous advancement of urban lighting work. The actual needs play an important role in promoting the new stage of scientific and standardized urban lighting industry according to law. The meeting requested that efforts should be made to increase the propaganda, implementation and supervision of the Regulations, and work hard to popularize regulatory knowledge, improve implementation efficiency and enhance supervision.

Pulse Deduster
The pulse precipitator is a new high efficiency pulse dust remover based on the MC-I type. It has the advantages of high purification efficiency, large gas handling capacity, stable performance, long life of filter bags, easy operation and low maintenance workload.
Product introduction
The pulse duster is a new type of high efficient pulse duster based on the Bag Filter . It combines the advantages of all kinds of pulse blowing duster in the split chamber. It overcomes the shortcomings of the low strength of the chamber and the uneven distribution of the air, and expands the application range.
The pulse Dust Collector is when the dust gas enters the dust collector from the inlet air inlet. First, it meets the inclined plate and baffle in the middle of the inlet and outlet. The air flow turns into the ash bucket. At the same time, the velocity of air flow slows down. Because of the inertia effect, the coarse particle dust in the gas is directly inflow into the ash bucket. With the effect of precollecting dust, the air flow into the ash bucket is later folded and the filter bag dust which is equipped with a metal skeleton is captured on the outer surface of the filter bag. The purified gas enters the cleaning room on the upper part of the filter bag and comes to the outlet. The dust gas is attached to the filter bag through the process of purifying the filter bag, and as the time increases. The dust on the filter bag is more and more, increasing the resistance of the filter bag, resulting in the gradual reduction of the air flow rate. It is the normal work to control the resistance in a certain range (140--170 millimeter water column). Once the range is beyond the range, the filter bag must be cleaned, and the pulse control valve is triggered in the order of pulse control to open the pulse valve and the pressure inside the air bag. The shrinkage air is sprayed into the corresponding filter bag by the Venturi Tube, and the filter bag expands rapidly at the moment, making the dust attached to the surface of the filter bag fall off, and the filter bag is restored to the initial state. The dust falls into the ash hopper and is discharged through the ash disposal system. Therefore, the dust deposited on the filter bag is periodically cleaned by impulse injection, so that the purified gas passes through normally and ensures the operation of the dust removal system.

Pulse Duster Series

Pulse Duster Series,Removable Deduster,Pulse Type Dust Collector,Pulse Deduster

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com