Blue Base Rod Mill Overview

The rod mill is loaded by barrel grinding bodies is named after the bar, rod mill is generally wet overflow type, it can be used as an open-circuit grinding, widely used in artificial stone sand, mineral processing plants, chemical First-grade grinding in the power sector of the plant. The particle size characteristics of the rod mill product are related to the condition of the rod milled ore. When the rod hits the ore, the first is to grind the coarse particles, and then the smaller ore particles are ground, thus reducing the risk of over-grinding. When the rods are turned up along the lining, the coarse particles are sandwiched between them, as if the rods are sieved, so that the fine particles pass between the slits of the rods, which is also advantageous for crushing the coarse particles and for concentrating the coarse particles in the grinding medium. The place to fight. Therefore, the product of the rod mill is relatively uniform and the pulverization is lighter.

Rod mills are available in dry rod mills and wet rod mills. Users can choose according to their actual situation. For the processing of quartz sand, dolomite, monazite and other products, the mill can be equipped with a magnetic separator to remove iron .

Blue base rod mill performance characteristics

The blue-based rod mill is available in both dry and wet versions, and users can choose according to their actual situation.

The blue base rod mill adopts advanced controllable feeding and discharging technology. The actual grinding material should be matched with the appropriate grinding body to change the traditional surface contact to line contact, so that the discharge granularity is more uniform, the output is higher, and the price reasonable, widely used in refractory, chemical industry, metallurgy and glass industries on the ground after high uniformity requirements finished grinding operation, in recent years, also for building sand sand industries.

The blue-based machine is characterized in that the grinding medium is in line contact with the ore during the grinding process, and thus has a certain selective grinding effect. The product has a relatively uniform particle size and less pulverized ore particles. When used for rough grinding, the rod mill is processed in a larger amount than a ball mill of the same specification. vice versa.

When the rod mill is working: the motor is driven by the reducer and the surrounding large gear reduction drive or by the low speed synchronous motor directly through the peripheral large gear reduction drive to drive the cylinder to rotate. The cylinder is filled with a suitable grinding medium - steel rod. Under the action of centrifugal force and friction force, the grinding medium is lifted to a certain height and falls down in a falling or falling state. The material to be milled continuously enters the inside of the cylinder by the feeding port, is crushed by the moving grinding medium, and discharges the product out of the machine through the overflow and continuous feeding force to carry out the next process operation.

Blue base rod mill technical parameter map

HW Casing

Hw Casing,Wellbore Casing,Hw Casing For Hq Drill Rod,Hq Casing Diameter

Jinan Allianz machinery Co.Ltd , https://www.aprdrill.com